D-Link JustConnect DNR-4020-16P User Manual page 93

Section 3 - Configuration
Configuring a Channel
Click the pencil icon under Operate to add a camera on a channel or to configure an existing channel.
Channel
Enter a name to identify the channel.
Name
IP Address
Enter the IP address of the camera. If the camera is connected
to one of the NVR's PoE ports, it will attempt to detect the IP
address automatically.
Protocol
Select the protocol to use (e.g. ONVIF).
Port
Enter the port used to connect to the camera.
Username:
Enter the username used to access the camera.
Password:
Enter the password associated with the username above.
Remote
Designate a channel for the camera's display.
Channel
D-Link DNR-4020-16P User Manual 88