Section 3 - Configuration
On this page, you can configure the DNR-4020-16P's 16 channels and add cameras to them. To search for available cameras,
click Start Search. To add cameras to a channel, enter the username and password in the fields at the bottom of the
screen and click Add.
Channel
The channel the specified camera is on.
IP
The camera's IP address.
Model
The camera's model number.
Protocol
The protocol used to communicate with the camera.
Firmware
The firmware the specified camera is running.
Version
Operate
Click this to set or update the camera's settings.
E (Explorer)
Click the blue E icon to open a browser to view the camera in the
web GUI.
Click the ... icon to reboot or reset the IP camera (for cameras
operating via private protocol only).
D-Link DNR-4020-16P User Manual
System
Channel
Camera
87