Download Print this page

D-Link DNR-326 Quick Install Manual

2-bay professional network video recorder.
Hide thumbs
   

Advertisement

Building Networks for People
Quick Install Guide
2-Bay Professional Network Video Recorder
This document will guide you through the
basic installation process for your new
D-Link Network Video Recorder.
DNR-326
Documentation also available on
CD and via the D-Link Website

Advertisement

   Related Manuals for D-Link DNR-326

   Summary of Contents for D-Link DNR-326

  • Page 1

    Building Networks for People Quick Install Guide 2-Bay Professional Network Video Recorder This document will guide you through the basic installation process for your new D-Link Network Video Recorder. DNR-326 Documentation also available on CD and via the D-Link Website...

  • Page 2: About This Guide

    Table 1. Front Panel Descriptions Installation and Connection Hard Drive Installation 1. Access the DNR-326's hard drive bays by sliding the top cover back until it unlatches from the device. Once the faceplate is unlatched, pull it off the device's bays.

  • Page 3: Getting Started

    Ethernet Connection Connect an Ethernet cable to the Ethernet port of your DNR-326. This cable should connect your DNR-326 to your local network via a router or switch, or directly to a computer for configuration. Connecting a UPS (Optional) If you have a Universal Power Supply (UPS) that you would like to use with the NVR, you may connect it before powering the unit on.

  • Page 4: Technical Support

    Copyright ©2012-2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

Comments to this Manuals

Symbols: 0
Latest comments: