D-Link JustConnect DNR-4020-16P User Manual page 67

Section 3 - Configuration
Date and Time
On this page you can change the device's date and time manually, or specify NTP
settings to acquire the date and time automatically.
Date Format
Specify the desired format that the device should use to display the
date.
Time Format
Specify the desired format that the device should use to display
the system time.
NTP Sync
Toggle this to automatically obtain the date and time from an
NTP server.
NTP Server
Specify the NTP server to use.
Frequency of
Specify how frequently (in seconds) to verify the system time
Checks
with the NTP server.
Date
If NTP Sync is disabled, automatically enter the date.
Time
If NTP Sync is disabled, automatically enter the current time.
D-Link DNR-4020-16P User Manual 62