D-Link JustConnect DNR-4020-16P User Manual page 36

Section 3 - Configuration
Temperature Param.
Enable
Toggle this to enable temperature measurement.
Temperature
Select the desired unit from Fahrenheit and Celsius.
Unit
Length Units
Select the unit to measure objects in the camera's display.
Cavity Temp.
Enter the cavity temperature of the camera.
Correction
This refers to the difference between the measured temperature
Coefficient
of an object and the actual temperature. Enter a value manually.
Mount
Enter the height at which the camera is mounted.
Distance
Face Color
Toggle this to overlay detected faces with a color corresponding to
their measured temperature.
Environment
Toggle this to automatically compensate for the temperature of the
Adaptation
environment.
Abnormal
Toggle this to flag detected abnormal temperatures.
Temp. Display
Temperature
Select the desired temperature area mode from the drop-down list.
Area
Temp.
Select the desired measurement mode from the drop-down list.
Measure
Mode
Normal Temp.
Enter the normal temperature range. Values outside this range can be
Range
set to trigger an alarm.
D-Link DNR-4020-16P User Manual 31