Abnormal Alarm - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
On this page you can enable or disable an alarm to trigger when an unusual event
occurs, such as a hard drive failure or loss of connectivity.
Enable
Enable or disable an abnormal alarm.
Abnormal
Alarm
Alarm Type
From left to right: trigger an alarm when the NVR fails to detect
a hard drive, when it detects an IP conflict, or when it loses its
network connection.
Event Actions
Select the event(s) the alarm should trigger from the following
list:
• Email: Send an email notification
• Buzzer: Trigger a buzzer sound
• Popup Message: Display a notification in a popup window
Enable Alarm
Trigger a notification on the Alarm Out interface(s).
Out
D-Link DNR-4020-16P User Manual

Abnormal Alarm

43