Section 3 - Configuration
On this screen you can enable, disable, or configure the auxiliary screen for your
device.
Enable
Toggle this to enable an auxiliary display. If this is enabled,
Auxiliary
you will also need to configure the auxiliary display's output
Screen
resolution, decoding ability, and layout.
VGA Output
Select the display resolution to use.
Resolution
Maximum
Configure how many channels will display on the HDMI and
Channel for
VGA screens respectively.
HDMI and
VGA
Layout Mode
Configure how many channels will display at one time on each screen.
Default Display
Select the channel to display by default.
Channel
Enable Auto
Toggle this to enable or disable auto sequencing on the auxiliary
Sequence
screen. If enabled, you may configure the auto sequence settings in
the Auto Sequence tab.
D-Link DNR-4020-16P User Manual
Auxiliary Sequence
70