Rtsp Connection - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
Use this page to configure your Real Time Streaming Protocol (RTSP) connection settings.
Custom
Designate the custom protocol to use (select 1-16 from the
Protocol
drop-down menu).
Protocol
Specify a protocol name to use.
Name
Stream Type
Select Main Stream or Sub Stream. If you select Sub Stream, the
options on the right will be enabled.
Protocol Type
Select the protocol type to use for the stream. This is set to
RTSP by default.
Port
Select the RTSP port to use. This is set to 554 by default.
Abs Path
Enter the absolute path for the RTSP connection to use.
D-Link DNR-4020-16P User Manual

RTSP Connection

14