D-Link JustConnect DNR-4020-16P User Manual page 109

Section 3 - Configuration
Face Detection
Enable
Enable or disable face detection.
Display Trace
Select the trace display mode from the drop-down menu.
Info
Show Detect.
Toggle this to show the temperature detection area with an
Area
outline.
Conf. Degree
Select the confidence degree from the drop-down.
Area ID
Designate an area ID to apply these settings to.
Face Pixel
Enter the minimum and maximum number of pixels that may be
Min/Max
registered as a person's face.
Image
Select the image matting quality from the drop-down.
Matting
Quality
Snapshot
Select the snapshot mode from the drop-down.
Mode
Upload Image
Select the interval (from 1 to 10, in seconds) at which snapshots
Interval
should be uploaded.
D-Link DNR-4020-16P User Manual 104