Section 3 - Configuration
Configure an alarm to trigger when the camera detects motion.
Select the channel to configure.
Channel
Toggle this to cause motion detection to trigger an alarm.
Enable
Toggle this to enable or disable motion analysis.
Motion
Analysis
Select the event(s) the alarm should trigger from the following
Event Actions
list:
•
Email: Send an email notification
•
Buzzer: Trigger a buzzer sound
•
Popup Message: Display a notification in a popup window
•
Full Screen: Display a full-screen notification on the attached
monitor
Trigger a notification on the Alarm Out interface(s).
Enable Alarm
Out / Camera
Alarm Out
Toggle to keep a record of alarm events.
Enable Event
Recording
Select the area of the display to scan for motion.
Detection
Area
Enable or disable the alarm according to a particular schedule.
Detection
Schedule
D-Link DNR-4020-16P User Manual
Motion Detection
40