Electro Cam PLUS PS-5000 Series Programming & Installation Manual page 16

External 24 & 48 Module I/O Racks: Dimensions & Specifications
Standard 24 Rack: PS-4100-12-224
Configuration for 48 I/O System
3-3 Wiring
End View
Notes:
• A Standard module is required for each Input or
Output used. See Appendix for module specs.
• AC and DC modules can be mixed as needed.
• Input modules can be used only with 5004 and 5104
units.
• Output modules act like switches; they do not
supply power to loads.
• Either 25 pin connector can be used to connect the
rack to the controller. The other connector ties to a
second rack for 48 I/O as shown below.
• Odd Terminals: (+) or hot
Even Terminals: (-) or load
PS-5001
PS-5101
PS-5004
PS-5104