Mechanical Programme Switch Mps (Optional); Display Programme Switch Dps (Option) - GEZE Slimdrive EMD Original Operating Instructions

Slimdrive EMD/EMD-F
3.4.2

Mechanical programme switch MPS (optional)

à Can be connected additionally to the internal programme switch (20).
At the mechanical programme switch MPS, the mode of operation for
the system is selected and the corresponding programme is displayed.
The mechanical programme switch is accessible for everyone without
a key switch.
With the mechanical programme switch MPS-ST, selection of the
modes of operation is disabled if the key provided has been removed.
3.4.3

Display programme switch DPS (option)

à Can be connected additionally to the internal programme switch (20).
If a dot appears on the bottom right-hand part of the display,
maintenance is due.
If a dot appears in the middle of the display, the door has not
yet been fully initialised after the mains voltage has been
switched on.
Initialisation is carried out automatically when the drive opens
and closes the door.
As an option, operation of the display programme switch can
be restricted by a key switch SCT.
Description
Mechanical programme switch MPS
Mechanical programme switch MPS-ST
with integrated key switch
Display programme switch DPS
OFF
9