Advertisement
11
1 7 1
Adjust video output timing
All playback channels are zero timed by default, however, video output timing
adjustment is provided to meet downstream timing requirements if needed. In this
procedure you will load a clip and verify the output timing for each play channel.
To adjust video output timing:
1. In VdrPanel, load and playback a clip as follows:
a. Click anywhere in the panel for the first Play Channel.
b. Select
c. Select a clip to load, then click
d. Click the
e. Repeat step a through step d for all Play channels.
23 Febuary 2004
to open the Load Clip dialog box.
Video Clip | Load Clip
(
) button in the panel.
ee
.
OK
PVS3000 & PVS3500 Installation Guide
41
Advertisement
