Select an RS-422 control protocol
4. Select a serial port using the port select drop-down list as shown. COM1 and COM2
are RS-232 ports on the PVS3000 rear panel. P1 through P8 are RS-422 ports on the
I/O Panel.
5. Click
6. Repeat step 2 through step 5 for the remaining panels.
7. Test the system using your automation controller.
This completes all the procedures in this Installation Guide. Refer to the Profile XP
System Guide for more information on customizing settings for your application.
44
PVS3000 & PVS3500 Installation Guide
Figure 1. dialog box
in the Channel Configuration dialog box.
OK
23 February 2004