Advertisement
Set up PFR700 network settings
2. Enter network settings for the RAID chassis.
3. For each SNMP manager to which you want to send SNMP trap messages, enter
the IP address of the PC hosting the manager. If you are monitoring the PFR700/E
with your NetCentral Lite on your Profile XP Media Platform, enter its IP address.
If you are monitoring the PFR700/E with NetCentral, enter the IP address of the
NetCentral server (NetCentral 4.x and higher) or NetCentral monitoring station
(NetCentral 3.x and lower).
4. Click
Now that the RAID controller network and SNMP settings are configured, you can
proceed to "Start NetCentral Lite monitoring software" on page 33.
32
PVS3000 & PVS3500 Installation Guide
to save settings and close.
OK
23 February 2004
Advertisement
