Advertisement
1 8 1 5
Create a video file system
IMPORTANT: If you are installing your Profile XP Media Platform as part of an
Open SAN, disregard this step. Instead, follow the instructions in the Open SAN
Instruction Manual for starting your Profile XP Media Platform.
Before you can use your Profile XP Media Platform system, you must create a video
file system on the Fibre Channel RAID Chassis using the Disk Utility.
NOTE: If you want to configure some drives as hot spare drives, do not perform this
procedure. Instead, perform the procedures found in Chapter 3 of the Profile XP
System Guide in the section titled "Configuring RAID storage using GVG Disk
Utility", then proceed with the next procedure in this guide.
To create a video file system:
1. Start Configuration Manager using the desktop shortcut or by selecting
Programs | Profile Applications | Configuration Manager
dialog box appears.
2. Click
23 February 2004
to start the GVG Disk Utility.
File System
. The Configuration Manager
PVS3000 & PVS3500 Installation Guide
Start |
19
Advertisement
