Advertisement
12
1 8 1
Select an RS-422 control protocol
Profile XP Media Platform remote control protocols are shown in the table. Follow
the procedure indicated for the remote control protocol you want to use. If you are not
using RS-422 control, you can skip this step
Protocols Available
Louth Protocol
Odetics Protocol
BVW Protocol
Profile Protocol
NOTE: Some third-party applications also support the General Purpose Interface
(GPI). Refer to your vendor's documentation for instructions on using GPI
triggers.
Setting up RS-422 remote control in VdrPanel
To setup a VdrPanel for remote control:
1. If VdrPanel is not already running, start it using the desktop shortcut or by selecting
Start | Programs | Profile Applications | VdrPanel
2. In VdrPanel, click in the panel you want to set up for remote control.
3. Choose
select a control protocol using the
23 February 2004
Application to Use
VdrPanel
Prolink
to open the Channel Configuration dialog box, then
Controller | Configure
Procedure to Follow
Setting up RS-422 remote control in VdrPanel
Setting up RS-422 remote control using Prolink
(Profile protocol)
. The VdrPanel window appears.
drop-down list as shown.
Protocol
PVS3000 & PVS3500 Installation Guide
43
Advertisement
