Advertisement
Create a video file system
3. If you are configuring a PFR500 or PFR600 storage system, perform the following
steps to set the Fibre Channel ID, otherwise, proceed to step 4.
a. Expand the tree view and right-click the
b. In the Set Fibre Channel ID dialog box, enter IDs as shown, then click
c. Click
d. Cycle the power on the RAID Controller chassis. Leave the power off for about
e. After the RAID Controller chassis has finished initializing, restart the
f. Start Configuration Manager using the desktop shortcut or by selecting
g. In Configuration Manager dialog box appears. click
4. Expand the tree view and identify bound LUNs and unbound disks by their
placement in the hierarchy of the tree view.
5. If there are unbound LUNs displayed in the tree view, you must perform the following
steps, otherwise, proceed to step 6.
a. To bind unbound disks, right-click the
20
PVS3000 & PVS3500 Installation Guide
PFR600, then select
Set Fibre Channel ID
in the Operation Successful dialog box.
OK
30 seconds before powering on again. You can leave the Expansion chassis
powered on during this time.
Windows NT operating system on the Profile XP Platform.
Programs | Profile Applications | Configuration Manager
Disk Utility.
in the context menu. Peer controllers that share the same set of disks
Bind LUNs
are automatically selected as a pair.
The Binding LUN... dialog box opens showing all unbound disks for the
controller listed in the Available Disk list.
icon under PFR500 or
Controller0
in the context menu.
.
File System
node for a controller, then select
Unbound
.
OK
Start |
to start the GVG
23 February 2004
Advertisement
