Download Print this page

Communication Parameters; Application Parameters - THOMSON GRASS VALLEY Profile XP PVS3000 Installation Manual

Media platforms for standard & high definition

Advertisement

Instructions
Type the IP address for this
RAID Controller, then press
Enter.
NOTE: RAID Controller A
and the optional RAID
Controller B must use
different IP addresses. Also,
the subnet must match the
Profile XP subnet unless a
gateway is used.
Type the subnet mask value,
then press Enter.
If a gateway is used, type y,
then press Enter, to provide a
Gateway address, otherwise,
just press Enter to continue.
Press Enter to accept defaults.
Press Enter to accept defaults.
Type 1, then press Enter.
[NOTE: The default value
may appear different than
shown here.]
Press Enter.
Type y, then press Enter.
Type public, then press
Enter.
Type the Profile XP IP
address, then press Enter. Add
additional trap destinations, if
needed (up to four total), or
press Enter a number of times
to advance to the next step—
Modify SNMP MIB
Communities.
NOTE: You can enter the
factory default IP address
for your Profile XP system
(192.168.0.10) unless you are
modifying it for an existing
network.
Press Enter.
Press Enter.
23 February 2004
Set up PFR500 or PFR 600 network settings
Text entered and displayed in terminal window
IP address(0.0.0.0 = RARP, 255.255.255.255 = DHCP/BOOTP)?
[192.168.0.11]
<enter your IP address>
Subnet mask for LAN (0 for none)? [255.255.255.0]
Should there be a default gateway for packet routing? [N]

COMMUNICATION PARAMETERS:

Baud rate for serial channels [9600]

APPLICATION PARAMETERS:

Boot Choices: [1]Factory Flash Loader or [2]Ciprico Network Server
Your Choice (1 or 2)? [2]
Mail and SNMP notification level: 1 (most verbose) through 5 (off)?
[2]
1
Modify User Password? [N]
Modify SNMP Trap Information? [N]
Trap Community Name? [ ]
You may enter up to 4 Hosts to receive Traps sent by this device
Enter Trap Manager #1 IP Address? [0.0.0.0]
Enter Trap Manager #2 IP Address? [0.0.0.0]
Enter Trap Manager #3 IP Address? [0.0.0.0]
Enter Trap Manager #4 IP Address? [0.0.0.0]
Modify SNMP MIB Communities? [N]
Modify Mail parameters? [N]
PVS3000 & PVS3500 Installation Guide
255.255.255.0
y
public
192.168.0.10
27

Advertisement

loading

This manual is also suitable for:

Grass valley profile xp pvs3500