Advertisement
Test your system setup using VdrPanel
3. Load and play a clip on each Play Channel as follows:
a. Click anywhere in the panel for a Play Channel.
b. Select
c. Select clip #1 in the clip list, then click
d. Click
4. Use steps 2 and 3 to test all record and play channels.
5. Continue with the next procedure in this guide to adjust video timing.
40
PVS3000 & PVS3500 Installation Guide
VideoClip | Load Clip
and verify that video, audio are present at the channel outputs. If you
Play
have a problem, refer to the Chapter 10, "Solving Common Setup Problems" in
the Profile XP System Guide.
to open the Load Clip dialog box.
to load the clip.
OK
23 February 2004
Advertisement
