Advertisement
Test your system setup using
1 6 1 10
VdrPanel
In this step, you will use VdrPanel in local control to test the record and play channels.
This procedure assumes you have video and audio signals connected to the inputs of
all record channels and have a way of monitoring the video, audio, and timecode
outputs.
In systems without record channels you must use the video network to transfer a clip
from another Profile. (See "Using Media Manager" in the
To test channels using VdrPanel:
1. Start VdrPanel using the desktop shortcut or by selecting
Applications | VdrPanel
NOTE: The first time VdrPanel runs, a panel opens for each default record and
play channel. The number of default channels depends on your model. Refer to
"Default Video Connections" on page 5.
2. Record a short clip, a few seconds in duration as follows:
a. Click the
Size
advances in the Timecode display.
b. Click the
is #1.
23 February 2004
. The VdrPanel window appears.
button in the panel for a record channel. Recording starts. The
Record
display indicates compressed frame sizes during record as timecode
button to end the recording. Notice the clip name in the clip list
Stop
23 February 2004
Start | Programs | Profile
PVS3000 & PVS3500 Installation Guide
).
39
Advertisement
