Screw Positions For Mounting And Hanging - Sony HDC-P50 Service Manual

1-2. Screw Positions for Mounting and Hanging

Note
The position of the fixing screws on the upper side is the same as that on the lower side. When attaching the screws to the head, etc.,
pay attention to the screw position and depth. If the diameter and depth of the screws are not matched, they are not fixed securely,
which may cause injury due to the dropping or falling of the camera.
Top view
A: Screw for 3/8 inch tripod (screw depth: 10 mm or less)
B: M4 screw (screw depth: 5 mm or less)
The optional V-shoe (Sony part number: A-8279-993-D) can be attached by this screw.
When attaching it, use the four alok +K4 x 8 screws (Sony part number: 3-729-072-02).
For details on how to purchase the parts, contact your local Sony Sales Office/Service Center.
C: M4 screw (screw depth: 6 mm or less)
D: M2.6 screw (screw depth: 5 mm or less)
E: M3 screw (screw depth: 7 mm or less)
This screw is used to secure the wire for drop prevention, etc. on the upper side only. Do not use it for securing this unit.
160.5
29.2 50.8
E
D
C
B
B
A A
B
B
C
D
E
26.5 30
48.5 89
60
37
E
D
C C
C C
D
E
Unit: mm
5