Section 6 Software Upgrade; Upgrading Software Programs; Upgrading Camera Application - Sony HDC-P50 Service Manual

6-1. Upgrading Software Programs

Software programs stored in the ROM (IC401) on the AT-195 board are upgraded by using a USB drive.
The software programs include camera application and operating system (OS), which is independently upgraded.
Use the following procedures to upgrade the software programs.

6-1-1. Upgrading Camera Application

Equipment required
USB drive (commercially available)
Tip
For recommended USB drive, refer to "Using a USB Drive" on the operating instructions.
Preparation
Copy the camera application update data to the USB drive using the following procedure.
Note
As for how to obtain the data file for update (hdcp50_app.pkg), contact your local Sony Sales Office/Service Center.
1. Create the following directory in the USB drive.
\MSSONY\PRO\CAMERA\HDCP50
2. Copy the data file for update "hdcp50_app.pkg" to the directory created.
Procedure
1. Connect the USB drive that contains the program for update to the USB connector of this unit.
2. Turn on the power of the unit.
3. Display the ROM VERSION page of the DIAGNOSIS menu.
4. Confirm that the cursor "?" is displayed to the left of D02, and then press ENTER button long.
5. Updatable items become selectable. Select "CAMERA APP" and then press ENTER button.
6. A message "VERSION UP OK?" appears. Select "YES".
7. The unit restarts automatically and the version update starts.
Upon completion of the version update, a message "UPDATE SUCCEEDED" appears.
8. Turn off and on the power of the unit and confirm that the version has been updated on the ROM VERSION page of the
DIAGNOSIS menu.
Section 6
Software Upgrade
103