Flexible Card Wire And Fine-Wire Coaxial Cable; Disconnecting And Connecting Flexible Flat Cable And Flexible Board - Sony HDC-P50 Service Manual

1-5. Flexible Card Wire and Fine-Wire Coaxial Cable

1-5-1. Disconnecting and Connecting Flexible Flat Cable and Flexible Board

Note
• Be very careful not to fold flexible flat cable or flexible board. Life of flexible flat cable and flexible board will be significantly
shortened if they are folded.
• Each flexible flat cable and flexible board have conductor side and insulated side. If the flexible flat cable and flexible board are
connected in the wrong orientation of the conductor side and the insulated side, the circuit will not function.
• Check that the conductive surface of the flexible flat cable and flexible board wire are not contaminated.
• Insert the flexible flat cable and flexible board straight and firmly in the interior of the connector.
Type A
Disconnecting
Flexible flat cable
Latch
A
Connector
1. Open the latch of the connector in the direction of arrow A to unlock.
2. Disconnect the flexible flat cable.
Connecting
Insulated side
B
1. Insert the flexible flat cable firmly as far as it will go with the insulating surface facing front.
2. Close the latch of the connector in the direction of arrow B to lock the flexible flat cable.
Flexible flat cable
Latch
Connector
15