Hardware Monitor - Asus V2-M2V890 User Manual

5.5.5

Hardware Monitor

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
Smart Q-Fan Function
CPU temperature beep function
CPU temperature high limit
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Ignored if you do not wish to
display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
and chassis fan speeds in rotations per minute (RPM). If any of the fans is
not connected to the motherboard, the specific field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V
Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
Smart Q-Fan function [Disabled]
Allows you to enable or disable the smart Q-fan control function. When
this field is set to [Enabled], the item Fan Auto Mode Start Speed, Fan
Auto Mode Start Speed Temp, and Fan Auto Mode Full Speed Temp items
appear. Configuration options: [Disabled] [Enabled]
Fan Auto Mode Start Speed [40%]
Sets the fan auto mode start speed. Configuration options: [20%] [40%]
[60%] [80%]
Fan Auto Mode Start Speed Temp [25ºC]
Sets the fan auto mode start speed temperature.
Configuration options: [25ºC] [26ºC] - [50ºC]
5-26
[48ºC/118ºF]
[35ºC/95ºF]
[3260RPM]
[N/A]
[ 1.504V]
[ 3.360V]
[ 5.160V]
[11.328V]
[Disabled]
[Enabled]
[95 degree]
CPU Temperature
Chapter 5: BIOS setup