Chipset; Northbridge Configuration; Memory Configuration - Asus V2-M2V890 User Manual

5.4.3

Chipset

The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
Warning: Setting wrong values in below sections
may cause system to malfunction.
Memory Controller
AGP Bridge K8M890 AGP/PCI EXPRESS Configuration
SouthBridge VIA VI8237A Configuration
Hyper Transport Configuration

NorthBridge Configuration

Memory Controller

Memory Configuration

ECC Configuration
Power Down Control
Alternate VID
Memory CLK
CAS Latency(Tcl)
RAS/CAS Delay(Trcd)
Min Active RAS(Tras)
Row Precharge Time(Trp)
RAS/RAS Delay(Trrd)
Row Cycle (Trc)
Asynchronous Latency
Memory Configuration
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
Enable Clock to All DIMMs
MemClk Tristate C3/ATLVID
Memory Hole Remapping
Memclock Mode [Auto]
Allows you to set the memory clock mode.Set by the code using [Auto]
or select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Manual] [Limit]
ASUS V-Series M2V890
[Auto]
[0.850V]
:333 MHz
:5.0
:5 CLK
:15 CLK
:5 CLK
:3 CLK
:21 CLK
:6 ns
[Auto]
[Auto]
[Auto]
[Disabled]
[Disabled]
[Disabled]
5-17