Screen 5: Main Menu - satmap active 20 Full User Manual

4.5

Screen 5: MAIN MENU

To access MAIN MENU screen
(GPS MAP → POSITION INFO → TRIP LOG →
MAIN MENU)
The MAIN MENU screen gives access to some of
the Active 20's main functions and settings.
The upper half of the MAIN MENU screen shows
the title of the Active Map, ie. the loaded
on the MapCard. The lower half of the
screen shows the name of the Active
Please Note
: Only one at once Route can be
"Active". If a GoTo point has been set - this counts
as a Route - and the previous Active Route will be
deactivated.
Software v3.13.11
BUTTONS :
OOI Menu.
Go to OOI Menu. These are Objects of Interest, and
MapPack
include Points of Interest (POIs), Areas (AOIs) and
MAIN MENU
Lines (LOIs).
Route.
GoTo and Marker.
Set GoTo point /
postcode: GB only).
A GoTo point is a single leg route with a single
waypoint.
A Marker allows the measurement of distance and
bearing between any two points.
Map Screens.
Return to GPS MAP / PLANNING
Folders.
Go to Folders.
Activate, Edit and Delete routes functionaliy. Make
changes to contents of the devices internal storage
/ memory.
Settings.
Go to SETTINGS MENU. More detail later in the
user guide
Primary Screens (Page Forward).
Press to scroll through the primary screens. This
Marker either by coordinates (or
map screens
Create routes, View routes,
21
Active Map :
Press & Hold
to see Map List
Active Route :
Press & Hold
to see Route
List
POIs, Etc.
Menu
Set
Markers
Map
Screens
Primary
Screens
MAIN MENU
© Satmap Systems Ltd 2018