Compass Settings - satmap active 20 Full User Manual

6. MAIN MENU: Settings Menu (... cont)

6.20 Compass Settings

(MAIN MENU → Settings → Compass Settings)
This controls the data boxes that appear on the
COMPASS screen and POINTER screen, and how
the bearing options are displayed in the data box on
the GPS MAP screen.
There are three norths commonly used in Great
Britain:
• Grid North:
the direction of a grid line which is
parallel to the central meridian on the National
Grid.
• True North:
the direction of a meridian of
longitude which converges on the North Pole.
Magnetic North:
•
the direction indicated by a
magnetic compass. Magnetic North moves slowly
with a variable rate and currently is West of Grid
North in Great Britain.
Compass Display
• Use the rocker pad, moving left/right to select from
Degrees, Cardinal points (e.g. N, NNE), or mil-
radians.
• Press Done or centre press the rocker pad to
return to SETTINGS MENU.
Grid Magnetic Angle
Software v3.13.11
• Use the rocker pad, moving left/right to switch
between Manual and Automatic.
.
Done Automatic
Press to select
If you want to set your Grid Magnetic Angle
manually, select Manual and then press Set. This
will take you onto a new SETTING screen on which
the Grid Magnetic Angle may be adjusted by
moving the rocker pad up/down.
Default
Pressing the button restores the following
setting:
Grid Magnetic Angle Value: W 03
• Press Done or centre press the rocker pad to
return to Compass Settings screen. Press
again to return to SETTINGS MENU.
Bearing Display
• Use the rocker pad, moving left/right to switch
between Show Grid Bearings
Magnetic Bearings.
• Press Done or centre press the rocker pad to
return to SETTINGS MENU.
Pressing the Default button restores the following
settings:
Compass Display
Degrees
Grid Magnetic Angle
Manual
Bearing Display
Show Grid Bearings
51
Done
Settings for Grid Magnetic
and Show
Manual or Automatic
Angle
Enter values for Manual
selection
© Satmap Systems Ltd 2018