Wi-Fi Settings - satmap active 20 Full User Manual

6.6

Wi-Fi Settings

(MAIN MENU → Settings → Wi-Fi Settings)
The Wi-Fi connectivity on the Active 20 serves two
purposes :
a. Download Software Updates,
b. Sync your routes and activies with Xpedition
Online Route Planner.
Default Wi-Fi State
The default Wi-Fi state determines which state the Wi-
Fi will be in when the device is powered on. If set to on,
the device will automatically turn on Wi-Fi connectivity
and attempt to connect to any local networks the
device has connected to before.
Software v3.13.11
Software Upgrades
; press this button to check
the status of the "application" software.
Installed Version: This is the version that is currently
running on your device. If it is a lower number than
the Official Version you should upgrade by pressing
the Install Official button.
Official Release: This is the version that is currently
being shipped by the factory on new units, has been
the most fully tested and should be supported by a
Full User Guide.
Beta Release: This is the latest version from the
Satmap software development team, and will include
all the latest features and bug fixes. However, it
may not be as fully tested or stable as the
Release. If the Beta Release is causing you issues -
you can "Roll-Back" to the Official Release.
35
Platform Upgrades:
Platform Upgrade may be released. This is a larger
and longer download than the Application software,
and handls more basic functions of the GPS unit
(power supplies, screen drivers and the such like).
Satmap recommend that you always upgrade to
the latest Platform, if a newer one is available.
This upgrade requires that you have an SD card
fitted with sufficient space available, however the
system will test for this and issue a warning if
required.
Please Note :
During All software upgrades it is
essential to ensure that the power to the GPS
unit is not distrubed, otherwise the software may
be currupted and the unit could enter
Official
Mode" and / or require return to Satmap for
attention.
Xpedition 2 Connectivity:
When set to 'Live Site' this will allow the user to
download routes directly from their Xpedition2
account to their device. Additional details will be
required to be entered into the device under the
Main Menu, Settings, Enter Username.
You will only be able to view routes saved
in Xpedition2, on your device whilst you are
connected to a Wi-Fi Network.
From time to time a
"Recovery
© Satmap Systems Ltd 2018