Goto And Marker; Goto And Marker Overview; Goto - Set By Poi; Goto & Marker - Set By Coords - satmap active 20 Full User Manual

16.

GoTo and Marker

16.1 GoTo and Marker Overview

(GPS MAP → MAIN MENU → GoTo and
Marker)
GoTo point:
A set point that acts as a target.
Once you have activated a GoTo point, a straight
line from your current location and GoTo point (or
route) will appear. This is useful in situations when
you do not know where you are going, i.e. you have
no determined route. Access various statistics from
the data box options using this feature, e.g. GoTo
Distance, GoTo ETA, GoTo Bearing etc.
Marker:
A red flag (reference point) on the map
from which the distance and bearing to any other
point on the map can be measured. You are not able
to follow a Marker and it is only available in Planning
mode. Use the rocker pad to move the planning
circle in the desired direction to calculate the straight
line distance or bearing.
The menu options are as follows:
• GoTo – Set By POI
• GoTo – Set By Coords
• Marker – Set By Coords
*Available once a GoTo point has been set.
Note: GoTo and Marker function for setting by postcode
are available for some units sold in the UK.
Clear Marker and GoTo – Clear buttons are
active once a point/marker has been set.
(Also accessible from the POSITION INFO
16.3 GoTo – Set by POI
Selecting this option take you to OOI Folders where
you can highlight a POI and select Use this POI
as GoTo.
Software v3.13.11
16.2 GoTo & Marker – Set By Coords
Selecting one of these options brings up a screen
on which grid references may be entered. Move
the rocker pad up/down to change the coordinate
values, and left/right to select the next entry box, or
use the Next button to move to the next row.
Coordinates can be entered in different position
display formats and the preferred format can
be selected from Main Menu → Settings → GPS
.
Settings
screen).
89
GoTo point
Set GoTo by
Grid reference
© Satmap Systems Ltd 2018