Alpha 260 / 520 Battery: Installation And Connection - pellenc Rasion 2 Smart Operating Instructions Manual

Table of Contents

Advertisement

Before electrically connecting the battery to the mower,
check that the battery power indicator is off.
The power indicator (represented by a flash) should not
be visible on the battery display.
Connect the power cable (7) of the mower to the battery
connector
Screw up tight and check that the cable is properly con-
nected.
Caution
To prolong the life of the connectors, it is advisable to protect them when they are disconnected.
Therefore, avoid leaving the connector in contact with abrasive or dirty surfaces, or subjecting
it to major impacts (falls).

4.5. ALPHA 260 / 520 BATTERY: INSTALLATION AND CONNECTION

After having installed the appropriate battery tray, the procedure for installing an Alpha 260 / 520 type battery is
identical.
Check the battery life before use. If necessary, recharge
the battery using the charger supplied with the battery.
Slide the battery onto the guide of the battery tray.
LAWN MOWER RASION 2 SMART
59_143879-B
59N_18_041
59N_18_042
15

Advertisement

Table of Contents
loading

Table of Contents