TOOL PREPARATION
INSTALLATION OF A BATTERY HOLDER
The mower is fitted at the base with a 1500 battery holder A different battery holder can be fitted if a ULIB
400 / 700 / 800 / 1100 battery is used.
- Remove the 4 screws holding the battery holder (12) in
place.
- Put the preferred battery holder (12) onto the frame
tube.
- Insert and tighten the 4 battery holder fixing screws
(12).
INSTALLATION OF THE 1500 BATTERY
- Check the charge of the battery (20) before use.
Recharge the battery, when necessary, using the
charger (19) provided with the battery.
- Slide the battery (20) from the rear into the upper hook
on the battery holder (12).
- Clip the front of the battery (20) into the lower hook of
the battery holder (12).
- Check that the battery is completely locked on the
holder.
- To remove the battery (20) from the battery holder
(12), lift it and press on the release button.
12
20
12
12
12
12
12
20