Collecting Bin Capacity; Installation Of A Battery Tray - pellenc Rasion 2 Smart Operating Instructions Manual

Adjust the tightening by completely tilting the handle ad-
justment lever (3) and screwing or unscrewing its central
screw.
Lock the handle adjustment lever (3) to lock the handle.

4.2. COLLECTING BIN CAPACITY

Note
The mower works like a vacuum cleaner that throws the cut grass into the collecting bin. Ensure that you
always empty the collecting bin before it is full to avoid impairing the performance.
Overloading the bag may damage it. Before attaching the collecting bin to the lawn mower, always check it
for holes, tears or damage.
Lift the ejection flap (6) and slide the collecting bin (14)
into the notches located at the rear of the mower.
Note
Always check that the collecting bin is correctly attached to the lawn mower before you begin mowing.

4.3. INSTALLATION OF A BATTERY TRAY

The mower is equipped with the 750/1200/1500 battery support as standard. To use an Alpha 260/520 type battery,
the factory-installed support must be removed and replaced by a optional suitable support.
LAWN MOWER RASION 2 SMART
59_143879-B
13