Alpha 520 Battery: Installation And Connection - pellenc RASION 2 EASY User Manual

Check that the battery switch is turned to off (position '0').
Connect the power cord (10) of the mower to the adapter
cable (24) (not included).
Then connect the end of the adapter cable to the battery (23)
taking care to align the polarizers.
Screw tight and check that the cable is properly connected.
Caution
Only ULIB 400/700/1100 batteries with a red connector can be used with this mower.
To prolong the life of the connector, it is advisable to protect it when unplugged. Therefore, avoid
leaving the connector in contact with abrasive or dirty surfaces, or subjecting it to major impacts
(falls).

4.6. ALPHA 520 BATTERY: INSTALLATION AND CONNECTION

After having installed the appropriate battery tray, the procedure for installing a alpha 520 battery identical.
Check battery autonomy (27) before use. If necessary,
recharge the battery using the charger (25) supplied with the
battery.
Slide the battery (27) onto the guide of the battery tray (26).
16
LAWN MOWER RASION 2 EASY
59_141654-A
59N_18_043
59N_18_044