Advertisement
ESC (quit)
SYSTEM UTILITY:
SYSTEM UTILITY:
-- Ramp Function --
-- Ramp Function --
Default setting of RAMP Function is Disable.
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device'
In the given example, Ramp Function was changed via PM1 encoder from Disable to Enable.
Possible settings for Ramp Function: Disable / Enable.
The ramp function will help to avoid any harsh audible offset whenever any extreme change of
!
parameter is executed in one single step via the PC software. (Such abrupt changes are not possible
when using the unit's encoder on the front panel)
Example: EQ Gain is changed from +15dB to -15dB (extreme setting...)
The procedure string of the ramp function is:
1) fade out of input signal
2) modification of parameter value
3) fade in of the input signal
Due to the fade-in / fade-out process, the ramp function should likely not be used during life performance.
ESC (quit)
Software Version
Software Version
Version: V1.20
Version: V1.20
Ramp Function
Ramp Function
Ramp Function
Ramp Function
Enter
Ramp : Disable
Ramp : Disable
Software Version
Software Version
Shows the loaded software version
Enter
Ramp Function
Ramp Function
PM1
Ramp : Enable *
Ramp : Enable *
1.
8
Enter
Advertisement
