Advertisement
The Copy Data command will copy all data (except device name and password)
of the active device to the selected units.
The COPY DATA window will show name and ID of the device (Source).
In order to Copy DATA from the Source device to any one of the connected,
devices, these have to be selected as destination devices by ticking the click boxes.
To copy the output name, tick the box ‚Include output name'
The copy process will be started by the ‚Copy program to selected devices' button.
While copying, all active destination windows will be closed.
Data received by the device will overwrite the current setting and will be immediately activated.
The incoming data will not manipulate any program stored in the device.
The Clear button will remove all selections (ticks) from the device list
Copy Program Data
Copy Program Data
1.
31
Advertisement
