Advertisement
ESC (quit)
SYSTEM UTIlity
SYSTEM UTIlity
-- Channel Link --
-- Channel Link --
Channel Link
Channel Link
Wait: channel linking...
Wait: channel linking...
Default setting of Channel Link ist OFF.
This parameter will be stored with command ‚Save Program to PC und Save Program to Device'
In the given example, Channel Link was changed to ‚ON', using the PM1 encoder.
Alternative settings of Channel Link: ON / OFF
Channel-Link function may only be used, when System Setup is set to ‚STEREO'
When Channel Link is changed from OFF to ON, all Channel A parameters will be copied to Channel B.
(This includes the Status Locked / Unlocked Preset)
Parameters ‚Name' and ‚Input Source' Routing will not be copied.
When Input Edit Button is pushed in Channel Link Mode, Display will show, that Channels A and B
are linked. Any change of parameter for channel A will also be true for channel B.
In Channel Link Mode, display will read: IN : A + B instead of In : A and In : B
EQ-1 will be shown als EQ-1(s).
ESC (quit)
SYSTEM UTILITY:
SYSTEM UTILITY:
-- Delay Units --
-- Delay Units --
Default setting for Delay Units is Distance (m).
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device'
In the given example, Delay Units are changed to Time (ms), using the PM1 encoder.
Possible settings of Delay Units: Distance (m) or Time (ms)
Channel Link
Channel Link
Channel Link
Channel Link
Enter
Link : OFF
Link : OFF
Delay Units
Delay Units
Delay Units
Delay Units
Enter
Unit : Distance (m)
Unit : Distance (m)
PM1
Link : ON *
Link : ON *
Wait: channel unlinking...
Wait: channel unlinking...
PM1
Unit : Time (ms) *
Unit : Time (ms) *
1.
7
Enter
Channel Link
Channel Link
Channel Link
Channel Link
Delay Units
Delay Units
Enter
Advertisement
