Advertisement
ESC (quit)
Pink Noise to CH.A
Pink Noise to CH.A
Pink Noise = Off
Pink Noise = Off
Default setting of Noise Generator ist ‚off'.
In the given example, the noise generator (CH A) was activated with the default setting in the Utility Menu.
!
When the noise generator is active, it will automatically
cut any incoming audiosignal on the same channel.
ESC (quit)
In A
In A
Low-A
Low-A
Gain
Gain
Gain = -5.0 dB
Gain = -5.0 dB
The default setting for GAIN ist 0.0dB .
In the given example, GAIN was changed from -5,0dB to 0,0dB using the PM1 decoder.
GAIN (Range): -12dB...+3dB
Position of GAIN = pre EQ
Any increase of GAIN will also cause a proportionate level increase of amplification noise.
ESC (quit)
OUT: A
OUT: A
Low-A
Low-A
Name
Name
Name = Low-A
Name = Low-A
The default setting for Name is ‚CH.A' .
In the given example, Name was changed from ‚Low-A' to ‚Mid-A' geändert. Encoder: PM1 and PM2.
(PM1 moves the cursor. PM2 selects the sign)
EDIT PARAMETERS CHANNEL A & CHANNEL B
EDIT PARAMETERS CHANNEL A & CHANNEL B
Pink Noise to Channel A
Pink Noise to Channel A
Pink Noise to CH.A
Pink Noise to CH.A
Enter
aPink Noise = OFF
aPink Noise = OFF
In A
In A
Low-A
Low-A
Enter
aGain = -5.0 dB
aGain = -5.0 dB
OUT: A
OUT: A
Low-A
Low-A
Enter
aName = Low-A
aName = Low-A
Pink Noise to CH.A
Pink Noise to CH.A
PM1
aPink Noise = ON
aPink Noise = ON
Gain
Gain
In A
In A
Gain
Gain
PM1
aGain = 0.0 dB
aGain = 0.0 dB
Name
Name
PM1
OUT: A
OUT: A
Name
Name
PM2
aName = Mid-A
aName = Mid-A
1.
16
ESC
Low-A
Low-A
Gain
Gain
ESC
Low-A
Low-A
Name
Name
Enter
Advertisement
