Advertisement
The button ‚Link Master to Slave' will activate this procedure and close the device link window. All slave windows will automati-
cally be closed. The Device Link button will be shows as Master / ID button (green). The Device Link button of the slaves will show
Slave / ID (orange).
Following this procedure, any change to the Master(s) will also be true of the Slave(s). Depending on the quantity of connected
slaves and different software functions, this procedure may take some time.
Any change to the Master will automatically close any open Slave window.
Selecting the green Master button will open the Device Link Window with Active ‚Unlink' Button
This window now allows the user to select or cancel any Master to Slave Link
The button ‚Link Master to Slave' will execute this procedure
The button ‚Unlink' will cancel all Master to Slave relations and the Device Link window will be closed.
The ‚Exit'
button will close the Device Link window without any changes.
Edit Device Name enables the user to enter any name for the active device (ID) This name will be shown in
the ID list and on the lcd screen when the device is online.
The ‚Stop' button will disconnect the device from the PC.
The ID list will show the disconnected device on red background.
Edit Device Name
Edit Device Name
STOP
STOP
1.
33
Advertisement
