Download Print this page

System Utility - Bell SMP QX Series Manual

Power amplifier with digital audio management

Advertisement

ESC (quit)

SYSTEM UTILITY:

SYSTEM UTILITY:
-- Set Default Values --
-- Set Default Values --
Set Default Values = Parameter will reset to default setting (depending on System Setup).
The following parameters will not be reset to their Default Values :
Power, Password, Channel Link, Show Parameter, Delay Units, Level Pot, Ramp Function
ESC (quit)
SYSTEM UTILITY:
SYSTEM UTILITY:
-- Level Pot --
-- Level Pot --
When switching on the SMP_QX Power Amp, LEVEL POT is enabled (in function))
This parameter will be stored with command ‚Save Program to PC und Save Program to Device'
When Level Pot is enabled, wheels ‚LEVEL A' and ‚LEVEL B' operate as Level Potentiometers.
ESC (quit)
SYSTEM UTIlity
SYSTEM UTIlity
-- Channel Link --
-- Channel Link --
Channel Link
Channel Link
Wait: channel linking...
Wait: channel linking...
Default setting of Channel Link is OFF
This parameter will be stored with command ‚Save Program to PC und Save Program to Device'
In the given example, Channel Link was changed to ‚ON', using the PM1 encoder.
Alternative settings of Channel Link: ON / OFF
Channel-Link function may only be used, when System Setup is set to ‚STEREO'
When Channel Link is changed from OFF to ON, all Channel A parameters will be copied to Channel B.
(This includes Status Locked / Unlocked Preset)
Parameters ‚Name' and ‚Input Source' Routing will not be copied.
When Input Edit Button is pushed in Channel Link Mode, Display will show, that Channels A and B
are linked. In this case, any change of parameter for channel A will also be true for channel B.
In Channel Link Mode, display will read: IN : A + B instead of In : A und In : B
EQ-1 will be shown als EQ-1(s).
Set Default Values
Set Default Values
Set Default Values
Set Default Values
Enter
(Enter) to confirm
(Enter) to confirm
Level Pot
Level Pot
Level Pot
Level Pot
Enter
Potentiometer : Enable
Potentiometer : Enable
Channel Link
Channel Link
Channel Link
Channel Link
Enter
Link : OFF
Link : OFF
Set Default Values
Set Default Values
Enter
Please Wait .....
Please Wait .....
PM1
1.
6
ESC
Level Pot
Level Pot
Enter
Disable *
Disable *

Advertisement

loading

This manual is also suitable for:

Smp700qxSmp1300qxSmp2000qxSmp3000qx