Advertisement
ESC (quit)
Noise Generator Utility:
Noise Generator Utility:
-- Noise Level & Type --
-- Noise Level & Type --
These parameters will not be stored with command ‚Save Program to PC und Save Program to Device'
Default setting for ‚Noise Level & Type' is: -40dBu / Pink
In the above example ‚Level' was changed via PM1 from -40dBu to -10dBu. ‚Type' was changed
via PM2 from Pink (Noise) to White (Noise).
Level Range: -40dBu .... + 6dBu
Noise Types: White, Pink
The noise generator may be activated separately for channel A and channel B.
ESC (quit)
Noise Generator Utility:
Noise Generator Utility:
-- Noise HPF Settings --
-- Noise HPF Settings --
These parameters will not be stored with command ‚Save Program to PC und Save Program to Device'
Default setting of ‚Frequency & Slope is: 20Hz / Bw / -6dBu
In the given example ‚Frequency' was changed via PM1 from 20Hz to 90Hz.
‚Slope'was changed via PM2 from Bw / -6 to Bw / -24.
Frequency Range HPF setting: from 15Hz.... 150Hz
HPF Slope: -6...-24 (Bw)
The High Pass Filter (HPF) protects loudspeaker systems from extreme signal
!
offsets in sublow frequencies.
Sub Menu: Noise Generator Utilities
Sub Menu: Noise Generator Utilities
Noise Level & Type
Noise Level & Type
Noise Level & Type
Noise Level & Type
Noise Level & Type
Noise Level & Type
Enter
Level=-40dBu Type=Pink
Level=-40dBu Type=Pink
Noise HPF Settings
Noise HPF Settings
Noise HPF Settings
Noise HPF Settings
Enter
Freq=20Hz Slope=Bw/-6
Freq=20Hz Slope=Bw/-6
PM1
Noise Level & Type
Noise Level & Type
PM2
Level=-10dBu Type=White *
Level=-10dBu Type=White *
PM1
PM2
Freq=90Hz Slope=Bw/-24 *
Freq=90Hz Slope=Bw/-24 *
1.
14
Enter
Noise HPF Settings
Noise HPF Settings
Enter
Advertisement
