Load program from PC will load a complete program including all parameters from the PC into the active device
window. This command will overrite the current program setting. All parameters loaded will be transferred to
the device and will be activated.
A program
will include all parameters with the exception of:
-Noise generator on / off
-EQ bypass (after loading the program, EQ bypass will be reset to OFF (EQ=active)
-Power
-Noise generator settings
-Delay units
-Ramp function
Commands (exclusive to PC software only)
Commands (exclusive to PC software only)
Load Program to PC
Load Program to PC
Load Program from PC
Load Program from PC
1.
27