Advertisement
Press the device Utility button for more than 3seconds
The following LCD screen will be shown:
Interface Status
Interface Status
Device : Online
Device : Online
The Status may be changed from Online to Offline via the PM1 encoder.
Confirm by Enter
The device will show the standard main lcd window
The Scan for New devices command is only available, when all active decive windows are closed.
In this case, the devices in the ID list will be shown with black writing on green background.
This command will scan the entire network for connected devices.
Devices found will be listed in the ID List (black script / green background)
A double clic on any listed device (ID list) will activate the connection between device and PC.
The selected device (in example device Nr.1) will answer with the following LCD screen:
The PC will reply by opening the main window + the utility window.
Interface Status
Interface Status
PM1
Device : Offline *
Device : Offline *
Scan for new devices
Scan for new devices
System Online
System Online
BELL SMP-QX ID (01)
BELL SMP-QX ID (01)
Enter
1.
26
Advertisement
