Advertisement
ESC (quit)
Interface UTILITY:
Interface UTILITY:
-- Interface Setup --
-- Interface Setup --
PM1 sets an individual ID number for each SMP_QX amplifier.
!
When a quantity of SMP_QX amps is working in the same system (interfaced via RS485) each one
must be given a different ID number in order to avoid any data crash.
In the given example, ID number for RS485 ID was changed from 02 to 01, using the
PM1 encoder.
A total of up to 32 units SMP_QX power amplifiers may be linked and controlled by PC (software)
via RS485 Interface.
Sub Menu: Interface Utilities
Sub Menu: Interface Utilities
Interface Utilities
Interface Utilities
Interface Setup
Interface Setup
Enter
Remote ID Num : 02
Remote ID Num : 02
Interface Setup
Interface Setup
PM1
Remote ID Num : 01
Remote ID Num : 01
1.
11
Enter
*
*
Advertisement
