Advertisement
ESC (quit)
OUT: A Low-A Source
OUT: A Low-A Source
Source = InA
Source = InA
Default setting for SOURCE is ‚InA' .
In the given example, Source for CHANNEL A was changed from InA to InB - using the PM1 encoder.
CHANNEL A was linked with Input A
Possible Source Routing for Channel A and Channel B: InA, InB, InA+InB
!
If Source Routing InA + InB has been selected, the summing Output Level is 0dB (not +6dB)
Setup: STEREO
Setup: BRIDGE
ESC (quit)
Out: A
Out: A
Low-A Level
Low-A Level
Level = 0.0dB
Level = 0.0dB
Default setting for LEVEL is 0.0dB. Range = -90dB....0dB.
In the given example, LEVEL of CHANNEL A was changed from 0.0dB to -6dB, using PM1.
LEVEL position is: post EQ - pre DSC - pre Limiter.
OUT: A Low-A Source
OUT: A Low-A Source
Enter
aSource = InA
aSource = InA
Default settings for SOURCE (Signalquelle)
Default settings for SOURCE (Signalquelle)
CHANNEL A: IN A
CHANNEL A: IN A
Out: A
Out: A
Low-A Level
Low-A Level
Enter
aLevel = 0.0dB
aLevel = 0.0dB
Source
Source
OUT: A Low-A Source
OUT: A Low-A Source
PM1
CHANNEL B: IN B
CHANNEL B: IN A (INVERSE)
Level
Level
Out: A
Out: A
PM1
aLevel = -6.0dB
aLevel = -6.0dB
1.
17
aSource = InB
aSource = InB
Low-A Level
Low-A Level
ESC
ESC
Advertisement
