Download Print this page

Bell SMP QX Series Manual page 13

Power amplifier with digital audio management

Advertisement

ESC (quit)
Security UTILITY:
Security UTILITY:
-- User Password --
-- User Password --
New Password
New Password
(ABC123)
(ABC123)
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device'
Default setting for USER PASSWORD is ‚000000'
To call up User Password, make the following entries:
Enter OLD password
(a wrong password will interrupt this routine)
Enter NEW password
Confirm NEW password
(entry of a wrong password will interrupt this routine)
In the given example, the old password is ‚000000'. It is being changed to ‚ABC123'.
PM1 and PM2 move the cursor and select characters and numbers.
After confirmation via enter, the new passwort can be written via PM1 and PM2.
!
In order to activate ‚Enable Password' you must enter the current password
ESC (quit)
Security UTILITY:
Security UTILITY:
-- Enable Password --
-- Enable Password --
Enable Password
Enable Password
Password : Enable *
Password : Enable *
Your personal, 6-digit password is the key to the SMP_QX amplifier.
!
Should the password be forgotten, the unit may only be unlocked by BELL
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device'
Default setting for ‚Enable Password' ist ‚Disable'. In order to change the status to ‚Enable Password' the
User-Password must be entered. In the given example ‚Enable Password' was changed from ‚Disable' to
‚Enable' (via PM1 Encoder).
1) If ‚will be shown' has been activated in the Show Parameter Menu, and if ‚enable password' has been set
to ‚Disable' , all parameters and their values will be shown in the menus ‚Edit' and ‚Utility'.
2) If ‚will not be shown' has been activated in the Show Parameter Menu, and if ‚Enable Password' has been
set to ‚Disable' , the parameters and their values will not be shown in the menus ‚Edit' and ‚Utility'.
If 2) is true, and if Enable Password' is active, all operating elements except for the Utility button are locked.
Die Utility button will automatically open the ‚Enable Password' menu.
User Password
User Password
User Password
User Password
Enter
(- - - - - - )
(- - - - - - )
Confirm Password
Confirm Password
Enter
(ABC123)
(ABC123)
Personal Password
Personal Password
Enter
Enable Password
Enable Password
Enter Password
Enter Password
Enter
(- - - - - - )
(- - - - - - )
User Password
User Password
PM1
PM2
Enter
Enable Password
Enable Password
Enter
Password : Disable
Password : Disable
1.
13
Enter
(000000)
(000000)
PM1

Advertisement

loading

This manual is also suitable for:

Smp700qxSmp1300qxSmp2000qxSmp3000qx