Chapter 6: Upgrade Kits - Dell EMC PowerEdge MX750c Installation And Service Manual

Table of Contents

NOTE:

Kit includes SATA, SAS, PCIE and Jumbo SAS cables. Not all cables are required for each configuration. Cables are

required based on the configuration.

Table 30. Upgrade kits

Kits

PERC H755 MX

PERC H745P MX (Jumbo PERC)

HBA350i MX

1. Identify the backplane (see column Backplane configuration in the table).

Figure 91. x6 universal backplane

Figure 92. x4 universal backplane

Figure 93. x6 SAS/SATA backplane

2. Identify the current system configuration (see column Upgrade from in the table) and the upgrade to configuration (see

column Upgrade to in the table).

3. Disconnect the card or cables (see column Disconnect and remove card or cables from the connector in the table) and

replace with the card or cables (see column Replace with the card or cables in the table).

4. For the final cabling configuration (see column Refer to cabling configurations in the table).