Table of Contents
Advertisement
Figure 61. Set the Anti-Tilt wires to the locked position and tightening the screws
Next steps
1.
Install the air
shroud.
2. Follow the procedure listed in
PERC card
Your system includes dedicated slots on the system board for PERC cards.
Removing the PERC card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Disconnect the cable connected to the PERC card.
Steps
1. Pull the blue pull tag to lift the lever up on the PERC card.
2. Holding the blue pull tag, lift the PERC card out of the system.
68
Installing and removing system components
After working inside your
Safety
Instructions.
Before working inside your
system.
system.
Advertisement
Table of Contents
