Sled Cover; Removing The Sled Cover - Dell EMC PowerEdge MX750c Installation And Service Manual

Figure 14. Installing the sled into enclosure
Next steps
1. Power on the sled.

Sled cover

Removing the sled cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Power off the sled.
3. Remove the sled from the
4. Place the sled on the flat surface with the top cover facing upwards.
Steps
1. Press the blue release tab and slide the cover towards the rear of the system.
2. Lift the cover away from the system.
Safety instructions.
enclosure.
Installing and removing system components 25