System Memory; System Memory Guidelines - Dell EMC PowerEdge MX750c Installation And Service Manual

Table of Contents

Advertisement

Figure 46. Installing the control panel
Next steps
1.
Install the drive
cage.
2.
Install all the
drives.
3. Follow the procedure listed in

System memory

System memory guidelines

The PowerEdge MX750c system supports DDR4 registered DIMMs (RDIMMs), load reduced DIMMs (LRDIMMs), Intel Optane
Data Center Persistent Memory Modules (DCPMMs). System memory holds the instructions that are executed by the
processor.
Your system contains 32 memory sockets that are split into two sets of 16 sockets, one set per processor. Each 16-socket set is
organized into eight channels. Eight memory channels are allocated to each processor. In each channel, the release tabs of the
first socket are marked white, and the second socket black.
Memory channels are organized as follows:
Table 19. Memory channels
Processor
Channel A
Processor 1
Slots A1 and
A9
Processor 2 Slots B1
and B9
After working inside your
Channel B
Channel C
Slots A5
Slots A3
and A13
and A11
Slots B5
Slots B3
and B13
and B11
system.
Channel D
Channel E
Slots A7
Slots A2
and A15
and A10
Slots B7
Slots B2
and B15
and B10
Installing and removing system components
Channel F
Channel G
Slots A6
Slots A4 and
and A14
A12
Slots B6
Slots B4 and
and B14
B12
Channel H
Slots A8 and
A16
Slots B8 and
B16
51

Advertisement

Table of Contents
loading

Table of Contents